30+ days ago - req18187

Sr. Electrical Engineer

Research & development

Electrical engineering

In a nutshell

Location

San Jose - CA, US

Team

Research & development

Experience

3-7 years

Degree

Master

Job Category

Electrical engineering

Introduction

ASML US, including its affiliates and subsidiaries, bring together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, Netherlands, and we have 18 office locations around the United States including main offices in Chandler, Arizona, San Jose and San Diego, California, Wilton, Connecticut, and Hillsboro, Oregon.

Job Mission

The mission of Senior Electrical Engineer position is to design SEM (scanning electron microscope) control modules with excellent performance. As an expert, you will help to build up cutting-edge SEM systems in ASML, contributing to move semiconductor industry forward.This position will be supporting the HMI division of ASML.

Job Description

As an Senior Electrical Engineer position at ASML San Jose, you will develop low-noise high-stability electrical modules for new-generation products of SEM system.

  • Discussion with different stakeholders in company for function and modules’ specs and requirements
  • Make requirement documents (EPS) and design documents (EDS)
  • Feasibility study for new design and build up simulation models for concept design
  • Design electrical board-level schematics according to the requirement documents
  • Design PCB layouts or guide PCB layout engineers based on the schematic
  • Build up prototypes for the design and test/improve the performance
  • Create technical production files for manufacturing, including PCB design
  • Communicate with manufacturing suppliers to solve technical issue in manufacturing
  • Support system integration with the designed function/modules in clean room
  • Analysis/review for technical issues in system

Education

  • Bachelor degree in Electronic Engineering or relevant engineering discipline.Master’s degree or PhD acceptable with less years of experience.

Experience

  • Minimum of 5+ years of hands-on, relevant, work related experience with Bachelor’s Degree.At least 2+ years of hands-on, relevant, work related experience with Master’s Degree. PhD (new-graduate is acceptable) with less experience.
  • Hands-on experience of schematic capture, schematic level simulation, PCB layout
  • Strong knowledge on analog related electronics design with fair handling capability on digital circuit
  • High-precision amplifier (board level) design experience, such as instrumentation amplifier, linear and logarithmic amplifier, TIA.
  • Precision ADC and DAC application design experience
  • Low-noise high-stability current source design experience
  • Familiar with discrete components such as BJT, JFET, MOSFET, TVS, Laser Diode, Photo-Diode
  • Familiar with test equipment such as multi-meter, LCR meter, signal / function generator, oscilloscope, signal / spectral analyzer, and network analyzer
  • Strong English written and oral communication skills

Additional Preferred Qualifications:

  • Large power high stable Laser/LED driver design
  • High-voltage amplifier design with kV’s output range and mV-level noise
  • High speed amplifier design experience
  • Sensor interface circuit design experience
  • Knowledge and experience of board level and module level shielding and grounding

Personal skills

  • Can observe and respond to people and situations and interact with others encountered in the course of work.
  • Can learn and apply new information or skills.
  • Must be able to read and interpret data, information, and documents.
  • Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
  • Ability to complete assignments with attention to detail and high degree of accuracy.
  • Proven ability to perform effectively in a demanding environment with changing workloads.
  • Result driven-demonstrate ownership and accountability.
  • Identifies bottlenecks and drives improvements.
  • Work independently or as part of a team and follow through on assignments with minimal supervision.
  • Demonstrate open, clear, concise and professional communication.
  • Ability to establish and maintain cooperative working relationships with co-workers and customer.
  • Work according to a strict set of procedures within the provided timelines.

Other information

  • Routinely required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the campus.
  • Occasionally lift and/or move up to 20 pounds.
  • May require travel (specify domestic and/or international) dependent on business needs – specify percentage of travel.
  • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
  • Can observe and respond to people and situations and interact with others encountered in the course of work.
  • Can learn and apply new information or skills.
  • Must be able to read and interpret data, information, and documents.
  • Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
  • Ability to complete assignments with attention to detail and high degree of accuracy.
  • Proven ability to perform effectively in a demanding environment with changing workloads and deadlines.
  • Result driven-demonstrate ownership and accountability.
  • Identifies bottlenecks and drives improvements.
  • Work independently or as part of a team and follow through on assignments with minimal supervision.
  • Demonstrate open, clear, concise and professional communication.
  • Ability to establish and maintain cooperative working relationships with manager, co-workers and customer.
  • Work according to a strict set of procedures within the provided timelines.

EOE AA M/F/Veteran/Disability