30+ days ago - req18559

Electro-Mechanical Engineer

Research & development

Mechanical engineering

In a nutshell

Location

San Jose - CA, US

Team

Research & development

Experience

3-7 years

Degree

Master

Job Category

Mechanical engineering

Introduction

ASML US, including its affiliates and subsidiaries, bring together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, Netherlands, and we have 18 office locations around the United States including main offices in Chandler, Arizona, San Jose and San Diego, California, Wilton, Connecticut, and Hillsboro, Oregon. Having joined the ASML family in 2016, HMI has become an integral part of our holistic lithography portfolio with innovative e-beam inspections solutions.

Job Mission

The Electromechanical Engineer position is set to play an important role in layout, routing, part selection, design, implementation, testing and troubleshooting of all electrically-driven devices in our new SEM (Scanning Electron Microscope) systems, including stages, robots, motors, pumps, fans, PLC, etc. While function performances of each equipped device must meet system’s requirements, minimization of electronic noises/interferences, acoustic noises, mechanical vibration and heat dissipation must also be taken into comprehensive consideration to these sensitive systems. Industrial standards/regulations should be conformed and high reliability should be ensured.

This position may require access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require the Company to proceed with candidates who are immediately eligible to access controlled technology.

Job Description

  • Work planning and coordination for self and other team members.
  • Partner collaboratively with other engineers from different sectors, system engineers, electrical engineers, mechanical engineers, manufacture engineers and field service engineers.
  • Concept and detailed 3D CAD design of complex electrical cabinets, modules, racks and PCBA according to semiconductor industry requirement, and prepare for 2D drawings for manufacturing.
  • Creation of detailed design documentation and review documents including performance specification, design specification, critical design review document, test specification, test report and more.
  • Cable/bundle design and routing in 3D environment
  • Modeling of heat transfer, fluid flow and other attributes which can affect machine performance, to design experiment to validate if the design can meet specs.
  • Prototype testing and cable routing in semiconductor machine environment and bench environment, and shall be able to quickly locate root cause if any issue comes up.
  • Extensive review of 2D drawing, 3D design and manufacturing documentations, and provide detailed feedback to design owners and manufacture.

Education

  • BS degree in Mechanical Engineering, or related field of Engineering i.e. Electrical, Physics, Mechatronics. MS degree preferred. (Knowledge in electromechanical engineering with wide scope to most related fields.)

Experience

  • Minimum two (2) years of relevant, work related experience in electro-mechanical design, on electrical modules, racks, cabinets and PCBAs.
  • Skilled usage of Solid works / NX (preferred) is needed for 3D and 2D design, previous experience with PLM (Material Order) software is needed (Teamcenter is preferred).
  • Knowledge of basic manufacturing processes and surface finish processes including machining, sheet metal, casting and more.
  • Understand basic Electrical Engineering knowledge, can read electrical schematic, wiring diagram and general electrical datasheet, and can use the knowledge to choose correct components in design to meet certain industry standard/requirements.
  • Previous working experience in electron-beam scanning microscope systems is a plus, electronic modules and semiconductor industrial with a good understanding of general industry standard and safety standard is preferred.
  • Knowledge of heat transfer and fluid dynamics, and can use ANSYS and STAR-CCM+to perform simulations preferred.
  • Cable routing and cable design experience is a plus.
  • Experience with technical writing in requirements, design specifications and test plans.
  • Can multi-task to achieve success.
  • Can make technical decisions based on a good understanding of design scope, timeline and cost.

Personal skills

  • Independent working ability; strong initiative, self-motivation and team-working attitude
  • Strong oral and written communication skills.
  • Can observe and respond to people and situations and interact with others encountered in the course of work.
  • Can learn and apply new information or skills.
  • Must be able to read and interpret data, information, and documents.
  • Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
  • Ability to complete assignments with attention to detail and high degree of accuracy.
  • Proven ability to perform effectively in a demanding environment with changing workloads.
  • Result driven-demonstrate ownership and accountability.
  • Identifies bottlenecks and drives improvements.
  • Work independently or as part of a team and follow through on assignments with minimal supervision.
  • Demonstrate open, clear, concise and professional communication.
  • Ability to establish and maintain cooperative working relationships with co-workers and customer.
  • Work according to a strict set of procedures within the provided timelines.

Other information

  • May be required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the campus.
  • Occasionally lift and/or move up to 20 pounds.
  • May require travel (specify domestic and/or international) dependent on business needs – specify percentage of travel.
  • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
  • Can observe and respond to people and situations and interact with others encountered in the course of work.
  • Can learn and apply new information or skills.
  • Must be able to read and interpret data, information, and documents.
  • Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
  • Ability to complete assignments with attention to detail and high degree of accuracy.
  • Proven ability to perform effectively in a demanding environment with changing workloads and deadlines.
  • Result driven-demonstrate ownership and accountability.
  • Identifies bottlenecks and drives improvements.
  • Work independently or as part of a team and follow through on assignments with minimal supervision.
  • Demonstrate open, clear, concise and professional communication.
  • Ability to establish and maintain cooperative working relationships with manager, co-workers and customer.
  • Work according to a strict set of procedures within the provided timelines.

EOE AA M/F/Veteran/Disability