30+ days ago - req19140

Industrial Production Engineer – PMO & CT Analyst

Manufacturing

Other technical job categories

In a nutshell

Location

Wilton - CT, US

Team

Manufacturing

Experience

3-7 years

Degree

Bachelor

Job Category

Other technical job categories

Introduction

ASML US brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, the Netherlands, and we have 18 office locations around the United States including main offices in Chandler, Arizona, San Jose and San Diego, California, Wilton, Connecticut, and Hillsboro, Oregon.

Job Mission

ASML is the world’s leading provider of lithography systems for the semiconductor industry, manufacturing complex machines that are critical to the production of integrated circuits or microchips. This position is for an engineering role in the Production Engineering department with innovative. Candidate will work with cross-sectors engineers to introduce new product to production floor and support output for existing product.

This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with applicants who are immediately eligible to access controlled technology.

Job Description

  • Work with Optical, Mechanical, Electrical and Software Engineering staff to develop Cycle time and Labor Hours Roadmaps of Opto-Mechanical/Electrical Modules.
  • Collect Cycle time data for multiple modules using “ONE” SAP environment.
  • Chair cross-sector cycle time meetings to present and analyze cycle time data.
  • Generate and distribute cycle time reports for multiple modules on a weekly basis.
  • Drive cycle time reduction plans through cross-sector process improvements.
  • Support in-production quality issues by assisting Production Assembly and Test Engineers and Technicians with cross-sector communications and historical cycle time data and analysis.
  • Support new product introduction in an existing “Concurrent Engineering” environment.
  • Support project planning and tasks towards executing these plans.
  • Support capital equipment budget planning and purchases to ensure module moverates.
  • Support Bill of Process development for multiple modules.
  • Support AIR CCB meetings.
  • Support the development of manufacturing procedures and technical work instructions.
  • Evaluate, track, and disposition failed part material notifications with proposed solutions.
  • Review Failure Analysis Reports from suppliers and help validate the root-cause of the failure Interface with internal and external customers.
  • Create and direct equipment calibration, upkeep, and new equipment specification and procurement for all analytical instruments used in manufacturing.

The employee is required to work in a cleanroom environment:

  • Full gowning (full body coveralls, hood, CR safety shoes, face mask, nitrile gloves and safety glasses. Working under ISO 9000/14000 standards).
  • Working around overhead cranes, fork trucks and motorized pallet movers.
  • Working around lasers; working with ladders; working on platforms; and working around chemicals.

Education

BS/MS in Engineering (Preferred Business/Industrial) or equivalent experience.

Experience

  • 1-3 years’ experience in an Engineering environment.
  • Experience in a production environment with high tech products and complex production process.
  • Experience in Lean Manufacturing.
  • Experience with engineering from an industrial and business mindset.
  • Able to read optical, mechanical and electrical drawings.
  • Strong MS Excel data management and presentation skills.
  • Experience developing VBA code.
  • Knowledge of MATLAB, LabVIEW and Pythonis a plus.
  • Working knowledge with Optical-Electrical sensors is a plus.
  • Experience in the field of technical Production Engineering and quality methodology such as statistical process control (SPC) and FMEA is a plus.
  • Working knowledge of NX, Teamcenter and SAP is a plus.
  • Capability to interface with multidisciplinary groups (including senior leadership), and be willing to take on responsibility and follow through.
  • Possess strong ownership characteristics – demonstrated commitment to achieving results on time.
  • Have strong written and oral communicative skills – ability to communicate effectively to your team and to senior management.
  • Focus on quality and continuous improvements.
  • Demonstrated “team player” with a quality orientation and interpersonal skills.

Personal skills

  • Can observe and respond to people and situations and interact with others encountered in the course of work.
  • Can learn and apply new information or skills.
  • Must be able to read and interpret data, information, and documents.
  • Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
  • Ability to complete assignments with attention to detail and high degree of accuracy.
  • Proven ability to perform effectively in a demanding environment with changing workloads and deadlines.
  • Result driven-demonstrate ownership and accountability.
  • Identifies bottlenecks and drives improvements.
  • Work independently or as part of a team and follow through on assignments with minimal supervision.
  • Demonstrate open, clear, concise and professional communication.
  • Ability to establish and maintain cooperative working relationships with manager, co-workers and customer.
  • Work according to a strict set of procedures within the provided timelines.

Other information

Role within Office

Responsibilities:

  • Routinely required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the campus.
  • Occasionally lift and/or move up to 20 pounds.
  • May require travel dependent on business needs.
  • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Role within the Factory

Responsibilities:

  • Must be willing to work in a clean room environment, wearing coveralls, hoods, booties, safety glasses and gloves for entire duration of shift.
  • While performing the duties of this job, the employee routinely is required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch.
  • The employee may occasionally lift and/or move up to 50 pounds.
  • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
  • Can work under deadlines.
  • The environment generally is moderate in temperature with moderate to high noise level.
  • Must be willing to work a compressed work week schedule – twelve-hour long shift and rotating from three to four days a week.
  • This must include references to day and night shifts for accommodation purposes.

Additional responsibilities for Wilton Factory:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • The employee is required to work in a cleanroom environment: full gowning (full body coveralls, hood, CR safety shoes, face mask, nitrile gloves and safety glasses. Working under ISO 9000/14000 standards).
  • Operating/working around overhead cranes, fork trucks and motorized pallet movers.
  • Working around lasers; working with ladders; working on platforms; and working around chemicals.
  • The employee is occasionally required to move around the campus.
  • The employee may occasionally lift and/or move up to 20 pounds.
  • May require travel dependent on company needs.
  • The environment generally is moderate in temperature and noise level.

EOE AA M/F/Veteran/Disability