30+ days ago - req21216

Proto Engineer

Research & development

Other technical job categories

In a nutshell

Location

San Jose - CA, US

Team

Research & development

Experience

3-7 years

Degree

Bachelor

Job Category

Other technical job categories

Introduction

ASML US brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, the Netherlands, and we have 18 office locations around the United States including main offices in Chandler Arizona, San Jose and San Diego California, Wilton Connecticut, and Hillsboro Oregon.

Job Mission

Integrate Proto e-Beam machines and maintain install based machines to support US D&E engineering work, SW release and customer demo.

This position may require access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require the Company to proceed with candidates who are immediately eligible to access controlled technology.

Job Description

Working at System Integrate team to integrate proto type E-Beam inspection machines .

Responsible for system configuration maintenance,diagnosis andreport issues to design team.

Responsible for system performance test and new product verification to meet system design specification and system performance specification.

Work with design team todevelop and evaluate Motion and PLC controlled system .

Work with design team to develop and evaluate HighVoltage and relate electrical modules in
E-Beam inspection system.

Tune and verification SEMreview and inspection performance.

Work with engineering teamon Engineering Change Request(ECR) andlead some projects related to Customer Special Requirement(CSR).

To analyze test results bygathering data from prototype tool.

Perform failure analysis including FMEA verification on the system.

Education

Bachelor degree or higher degree
Major in Electronic, Mechanic, Optical, Computer Hardware or physics background.

Experience

3+ years
Semiconductor area and cleanroom working experience are preferred

Personal skills

Able to apply professional knowledge to develop /integrate semiconductor equipment and ability to learn new technology through hands on experience and project development.

Good analytical skills.

Use different tools for troubleshooting system .

Time management skills to handle multiple requests at a given time

Able to effectively communicate technical information to both technical and non-technical audience.

Worked for large scale system and have basic knowledge of Mechanical, EE, Electronic Optical and Computer Engineering and have specific strength at one of the above areas.

Other information

Partial Role within Office (40%)
Responsibilities
Routinely required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the campus.
May require travel (specify domestic and/or international) dependent on business needs – specify percentage of travel.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
Can observe and respond to people and situations and interact with others encountered in the course of work.
Can learn and apply new information or skills.
Must be able to read and interpret data, information, and documents.
Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
Ability to complete assignments with attention to detail and high degree of accuracy.
Proven ability to perform effectively in a demanding environment with changing workloads and deadlines.
Result driven-demonstrate ownership and accountability.
Identifies bottlenecks and drives improvements.
Work independently or as part of a team and follow through on assignments with minimal supervision.
Demonstrate open, clear, concise and professional communication.
Ability to establish and maintain cooperative working relationships with manager, co-workers and customer.
Work according to a strict set of procedures within the provided timelines.

Partial Role within the Cleanroom(60%)
Responsibilities
Must be willing to work in a clean room environment, wearing coveralls, hoods, booties, safety glasses and gloves for entire duration of shift.
While performing the duties of this job, the employee routinely is required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch.
The employee may occasionally lift and/or move up to 50 pounds. Can we be more specific:Must be willing to lift up to X pounds, pull Y pounds at least once a day and spend the majority of time (greater than 90% less break time) on the floor working on tool sets, walking three to five miles a day, and/or standing/sitting for nine hours.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
Can work under deadlines.
The environment generally is moderate in temperature with moderate to high noise level.
Must be willing to work a compressed work week schedule – twelve-hour long shift and rotating from three to four days a week.
This must include references to day and night shifts for accommodation purposes.


EOE AA M/F/Veteran/Disability