30+ days ago - req21524

Sr. SEM Electrical-Layout Function Architect / Designer

Research & development

Electrical engineering

In a nutshell

Location

San Jose - CA, US

Team

Research & development

Experience

3-7 years

Degree

Bachelor

Job Category

Electrical engineering

Introduction

ASML US, including its affiliates and subsidiaries, bring together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, Netherlands, and we have 18 office locations around the United States including main offices in Chandler, Arizona, San Jose and San Diego, California, Wilton, Connecticut, and Hillsboro, Oregon.

Job Mission

As SEM Electrical-Layout Function Architect / Designer (Tech Leader), your mission is to specify, design, realize and qualify electrical and safety infrastructure of SEM function for our e-beam inspection system. This job serves as major interface towards system E-Layout. This position is based in San Jose and mainly focuses on e-beam inspection system.

This position may require access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require the Company to proceed with candidates who are immediately eligible to access controlled technology.

Job Description

  • Deliver functional overview, block diagram and module list describing SEM electronics, support BOM creation and release.
  • Deliver cable overview describing inter-connection within SEM electronics and connection interfaces with other FC.
  • Propose power supply solutions for SEM electronics and deliver power supply requests towards system E-Layout.
  • Propose, deliver and implement grounding design of SEM SF, including SEM EO, electronics modules, etc.
  • Together with system E-Layout FA, deliver layout and PE design for SEM electronics.
  • Together with system M-Layout FA, works as Volume Controller for SEM Electronics.
  • Deliver functional specification (EPS), test specification (TPS), design specification (EDS), qualification document (TAR) and other documentations for SEM E-Layout related functionalities.
  • Support integration and related trouble shooting activities of SEM SF.
  • Provide input for SEM E-Layout design roadmap, including safety, grounding, EMI/EMC, PS, volume, service, diagnostics, etc.
  • Support SEM TestRig design, implementation, integration and verification.
  • Other related works to enable SEM electronics functionality and performance, including travel within ASML or to customer site.

Education

  • Bachelor’s degree in Electrical Engineering with 5 years of relevant work related experience, or Master’s degree in Electrical Engineering with 3 years of relevant work related experience.

Experience

  • Minimum 5 years of relevant work related experience with a BS or at least 3 years of relevant work related experience with an MS.
  • Minimum 2 years of electronics or electrical hands-on design experience.
  • Experience as architect with multi-disciplinary system design is strongly preferred.
  • Has experience with general electrical engineering principles and electrical development methods and processes.
  • Has knowledge of electrical connection methods, AC mains power, DC power distribution and signal transmission.
  • Has knowledge on standards for EMC and electrical safety (International (IEC) standards, US standards (NFPA, UL)) and preferably SEMI.
  • Has knowledge on EMI/EMC design principle to minimize coupling induced disturbance.
  • Has the ability to set up cabling concepts.
  • Knowledge/hands-on experience with software/technical tools (i.e. Xpedition or similar schematic/layout tool, Visio or similar diagram tool, NX or similar mechanical design tool, etc.)
  • Experience with System modeling, simulation (Simulink or similar) and verification tooling (LabVIEW or similar) experience is a plus.

Personal skills

  • Can observe and respond to people and situations and interact with others encountered in the course of work.
  • Strong English communication skills – both written and oral, ability to influence, etc.
  • Can learn and apply new information or skills.
  • Must be able to read and interpret data, information, and documents.
  • Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
  • Ability to complete assignments with attention to detail and high degree of accuracy.
  • Proven ability to perform effectively in a demanding environment with changing workloads.
  • Result driven-demonstrate ownership and accountability.
  • Identifies bottlenecks and drives improvements.
  • Work independently or as part of a team and follow through on assignments with minimal supervision.
  • Demonstrate open, clear, concise and professional communication.
  • Ability to establish and maintain cooperative working relationships with co-workers and customer.
  • Work according to a strict set of procedures within the provided timelines.

Other information

  • Routinely required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the campus.
  • Occasionally lift and/or move up to 20 pounds.
  • May require travel (specify domestic and/or international) dependent on business needs – specify percentage of travel.
  • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
  • Can observe and respond to people and situations and interact with others encountered in the course of work.
  • Can learn and apply new information or skills.
  • Must be able to read and interpret data, information, and documents.
  • Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
  • Ability to complete assignments with attention to detail and high degree of accuracy.
  • Proven ability to perform effectively in a demanding environment with changing workloads and deadlines.
  • Result driven-demonstrate ownership and accountability.
  • Identifies bottlenecks and drives improvements.
  • Work independently or as part of a team and follow through on assignments with minimal supervision.
  • Demonstrate open, clear, concise and professional communication.
  • Ability to establish and maintain cooperative working relationships with manager, co-workers and customer.
  • Work according to a strict set of procedures within the provided timelines.

Role within the Lab/Cleanroom

  • Must be willing to work in a clean room environment, wearing coveralls, hoods, booties, safety glasses and gloves for entire duration of shift.
  • While performing the duties of this job, the employee routinely is required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch.
  • The employee may occasionally lift and/or move up to 50 pounds. Can we be more specific:Must be willing to lift up to X pounds, pull Y pounds at least once a day and spend the majority of time (greater than 90% less break time) on the floor working on tool sets, walking three to five miles a day, and/or standing/sitting for nine hours.
  • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
  • Can work under deadlines.
  • The environment generally is moderate in temperature with moderate to high noise level.
  • Must be willing to work a compressed work week schedule – twelve-hour long shift and rotating from three to four days a week.
  • This must include references to day and night shifts for accommodation purposes.

EOE AA M/F/Veteran/Disability