6 days ago - req23962

Measurement Engineer

Research & development

Mechatronics

In a nutshell

Location

Wilton - CT, US

Team

Research & development

Experience

3-7 years

Degree

Bachelor

Job Category

Mechatronics

Introduction

ASML US brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, the Netherlands, and we have 18 office locations around the United States including main offices in Chandler, Arizona, San Jose and San Diego, California, Wilton, Connecticut, and Hillsboro, Oregon.

Job Mission

Establish test competency in Wilton using TMF methodologies, technologies, and WoWs. This individual will be responsible for mechatronic design of TMF test modules. This individual will be responsible for selecting the correct sensors and acquisition system for the desired measurement methodology and integrating it into the test setup. This individual will be responsible for the quality of the data collected and the influence the measurement tools have on the test.

Within ASML the sector Development & Engineering is responsible for the specification and the design of the ASML products. The group TMF (Test and Measurement Facility) is responsible for test strategy, design, realization and analysis on mechanical (sub)-systems and components across all ASML sites.

This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology.

Job Description

  • Design and automate Mechatronic (Mechanical and Electrical Systems) to perform tests.
  • Select and integrate instrumentation based on measurement method.
  • Design, build, and troubleshoot electrical systems for test modules.
  • Write, review and communicate test plans.
  • Execute tests according to test and project planning, analyze and report test results.
  • Actively contribute to the testing competency within ASML.

Position reports to GL of the WT DE IQR C Hardware & Test Center group. The position will focus on Test Methodology, data acquisition, mechatronic design, integration and operation, test performance and quality.

Education

BS Engineering – electrical, mechatronics or (applied) physics, or equivalent experience.

Experience

  • At least 3-7 years experience in a relevant multi-disciplinary technical work environment.
  • Hands on experience with sensor integration and data acquisition.
  • Hands on experience with motors, actuators, and electrical control systems.
  • Experience with the design, realization, execution, and analysis of test setups on mechanical and electrical systems.
  • Proficient experience with MATLAB and LabView.
  • Preferred experience with Xpc software and Minitab.
  • Preferred Weibull, HALT, HASS test experience and/or failure mode analysis, especially from a materials perspective.
  • Goal driven, quality focused, team oriented.
  • Strong communication skills.
  • Hands-on individual with broad technical knowledge of mechanical and mechatronic systems.
  • Flexible and able to progress within an uncertain and rapidly changing environment.

Personal skills

  • Can observe and respond to people and situations and interact with others encountered in the course of work.
  • Can learn and apply new information or skills.
  • Must be able to read and interpret data, information, and documents.
  • Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
  • Ability to complete assignments with attention to detail and high degree of accuracy.
  • Proven ability to perform effectively in a demanding environment with changing workloads and deadlines.
  • Result driven-demonstrate ownership and accountability.
  • Identifies bottlenecks and drives improvements.
  • Work independently or as part of a team and follow through on assignments with minimal supervision.
  • Demonstrate open, clear, concise and professional communication.
  • Ability to establish and maintain cooperative working relationships with manager, co-workers and customer.
  • Work according to a strict set of procedures within the provided timelines.

Other information

Role within Office

Responsibilities:

  • Routinely required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the campus.
  • Occasionally lift and/or move up to 20 pounds.
  • May require travel dependent on business needs.
  • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Role within the Factory

Responsibilities:

  • Must be willing to work in a clean room environment, wearing coveralls, hoods, booties, safety glasses and gloves for entire duration of shift.
  • While performing the duties of this job, the employee routinely is required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch.
  • The employee may occasionally lift and/or move up to 50 pounds.
  • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
  • Can work under deadlines.
  • The environment generally is moderate in temperature with moderate to high noise level.
  • Must be willing to work a compressed work week schedule – twelve-hour long shift and rotating from three to four days a week.
  • This must include references to day and night shifts for accommodation purposes.

Additional responsibilities for Wilton Factory:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • The employee is required to work in a cleanroom environment: full gowning (full body coveralls, hood, CR safety shoes, face mask, nitrile gloves and safety glasses. Working under ISO 9000/14000 standards).
  • Operating/working around overhead cranes, fork trucks and motorized pallet movers.
  • Working around lasers; working with ladders; working on platforms; and working around chemicals.
  • The employee is occasionally required to move around the campus.
  • The employee may occasionally lift and/or move up to 20 pounds.
  • May require travel dependent on company needs.
  • The environment generally is moderate in temperature and noise level.

EOE AA M/F/Veteran/Disability


Learn more about this job