30+ days ago - req25396

Manufacturing Test Technician

Manufacturing

Other job categories

In a nutshell

Location

San Diego - CA, US

Team

Manufacturing

Experience

3-7 years

Degree

High school

Job Category

Other job categories

Introduction

ASML US, including its affiliates and subsidiaries, bring together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, Netherlands, and we have 18 office locations around the United States including main offices in Chandler, Arizona, San Jose and San Diego, California, Wilton, Connecticut, and Hillsboro, Oregon.

Job Mission

Performs sub-system assembly, optical alignment, functional test, equipment calibration, station setup and process development support.Recommends changes in design, methods, and procedures to enhance product quality.

This position may require access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require the Company to proceed with candidates who are immediately eligible to access controlled technology.

Job Description

  • Uses standardized tools and electronic equipment (i.e., torque wrenches, electric and pneumatic screwdrivers and ball drivers, lifting equipment, computers, oscilloscopes) to assemble/install/remove or perform testing and troubleshooting.
  • Trains others on areas of test processes and troubleshooting when required.
  • Performs a variety of moderately complex technical service/support duties requiring specialized knowledge (i.e., sub-assembly, assembly, build, test, R&D, QA).
  • Utilizes functional area databases to run reports and analyze/trend data; Makes recommendations to management in order to meet production needs.
  • Interfaces with engineers to support special tests and experiments with detailed instructions.
  • Documents and monitors safety or security violations critical to product quality or operations.
  • Uses specialized test equipment such as leak testing, Hi - Pot and alignment instruments.
  • Troubleshoots failures with pressurized Gas, and Water sytems with Helium.
  • Reads and understands business documents such as Bill of Materials, routing sheets, inventory records and work instructions.
  • Uses cleaning cloths with Acetone, Methanol, and Isopropyl alcohol to wipe surfaces prior to shipping product.
  • Maintains a clean work area, and is responsible for designated tools (routine maintenance and calibration).
  • Installs electrical connectors to modules.
  • 1st Shift – 6 am – 2:30 pmM – F(must be flexible to work OT if needed).
  • Performs other duties as assigned.

Education

  • Requires a High School Diploma or equivalent. Associate’s Degree in technical or scientific field is highly desired.

Experience

  • Requires a minimum of six (6) years related work experience.
  • Experience in using all electronic/pneumatic tools.
  • Ability to read and interpret schematics/drawings.
  • Strong understanding of laser systems is required, or equivalent.
  • Ability to read and interpret schematics/drawings.
  • Ability to apply advanced knowledge of Company policies and technical skills in support of multiple products, services and components.
  • Strong electrical/ electronic background.
  • Strong ability to troubleshoot, identify and correct problems in complex software-driven electronic systems, (not circuit-board troubleshooting).
  • Experience with Automated Testing Equipment, LabVIEW preferred.
  • Familiarity with cleanroom protocol is preferred.
  • Knowledge of Lean Manufacturing and 5S principles preferred.
  • Ability to calculate figures and amounts such as proportions, percentages, basic algebra.
  • Full to advanced proficiency with a wide variety of tools and equipment (e.g., oscilloscopes, voltage and current probes, multi-meters, chart recorders, Mensors, and Helium Sniffers).
  • Excellent written and verbal communication skills.
  • Requires general computer skills and knowledge.

Personal skills

  • Can observe and respond to people and situations and interact with others encountered in the course of work.
  • Can learn and apply new information or skills.
  • Must be able to read and interpret data, information, and documents.
  • Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
  • Ability to complete assignments with attention to detail and high degree of accuracy.
  • Proven ability to perform effectively in a demanding environment with changing workloads.
  • Result driven-demonstrate ownership and accountability.
  • Identifies bottlenecks and drives improvements.
  • Work independently or as part of a team and follow through on assignments with minimal supervision.
  • Demonstrate open, clear, concise and professional communication.
  • Ability to establish and maintain cooperative working relationships with co-workers and customer.
  • Work according to a strict set of procedures within the provided timelines.

Other information

Role within the Factory

  • Must be willing to work in a clean room environment, wearing coveralls, hoods, booties, safety glasses and gloves for entire duration of shift.
  • The employee may occasionally lift and/or move up to 50 pounds. Can we be more specific:Must be willing to lift up to X pounds, pull Y pounds at least once a day and spend the majority of time (greater than 90% less break time) on the floor working on tool sets, walking three to five miles a day, and/or standing/sitting for nine hours.
  • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
  • Can work under deadlines.
  • The environment generally is moderate in temperature with moderate to high noise level.
  • Routinely may be required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the campus.
  • Can observe and respond to people and situations and interact with others encountered in the course of work.
  • Can learn and apply new information or skills.
  • Must be able to read and interpret data, information, and documents.
  • Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
  • Ability to complete assignments with attention to detail and high degree of accuracy.
  • Proven ability to perform effectively in a demanding environment with changing workloads and deadlines.
  • Result driven-demonstrate ownership and accountability.
  • Identifies bottlenecks and drives improvements.
  • Work independently or as part of a team and follow through on assignments with minimal supervision.
  • Demonstrate open, clear, concise and professional communication.
  • Ability to establish and maintain cooperative working relationships with manager, co-workers and customer.
  • Work according to a strict set of procedures within the provided timelines.

EOE AA M/F/Veteran/Disability


Learn more about this job