30+ days ago - req27438

Sr. Mechanical Engineer (Vacuum)

Research & development

Mechanical engineering

In a nutshell

Location

San Jose - CA, US

Team

Research & development

Experience

3-7 years

Degree

Master

Job Category

Mechanical engineering

Introduction

ASML US brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, the Netherlands, and we have 18 office locations around the United States including main offices in Chandler Arizona, San Jose and San Diego California, Wilton Connecticut, and Hillsboro Oregon.

Job Mission

As a Vacuum system Design Engineer for electron beam system, you will perform a variety of engineering tasks including designing, developing, testing, analyzing, troubleshooting and implementing sub-assemblies and modules as you create and evaluate designs to meet requirements of specified applications. Your design activities will include high vacuum system design and implementation, vacuum control strategy design, system performance qualification and diagnostic. By tapping into your engineering acumen, you research and select future key suppliers for consideration as turn-key providers of sub-systems as well as develop resolutions to critical issues and broad design matters. You will work on issues that impact design/selling success or address future concepts, products, or technologies.

This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. These questions assist the Company in determining whether an individual qualifies for the position.Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology.

Job Description

Developvacuum related module from concept to completion, and final release tomanufacturing based on requirements of functionality, performance,serviceability and availability for electron beam systems and subsystems.
CreateVacuum module’s element performance specification and element designspecification.
Createdetailed 3D model and 2D drawings of parts and assemblies using CADsoftware for manufacturing and integration.
Leaddesign reviews, budget development, risk assessment and mitigation,design and execution of experiments, verification processes, validationprocesses.
Workwith vendors and consultants to select, develop, analyze and fabricatecomponents and sub-assemblies.
Workcross-functionally and drive implementation of design best practices intoproduct design.
Deliverclear technical documents, provide effective presentation and written evaluationsto communicate concepts, designs, test results, etc.
Leadintegration, qualification and diagnostic process of vacuum modules onprotos
Providetech support for system integration process, manufacturing process and fieldtroubleshooting process.

Education

BA,MSc or PHD related to Mechanical Engineering or Physics.

Experience

Musthave good understanding of physics and mechanics.
StrongHands-on proficiency with 3D modeling & 2D detailed drawings using CADsoftware including but not limited to Solidworks and NX.
3+years of hands-on experience in mechanical hardware developing within acorporate setting working on a complex engineering product.
2+years of hands-on experience with vacuum standard parts including but notlimited to pumps, valves, gauges etc.
Experiencein designing mechanical parts and assemblies for vacuum application.
Hands-onexperience with vacuum system operation and diagnostic.
2+years of applicable relevant experience on a semiconductor equipmentmechanical product is desired.
Knowledgewith materials and material selection, manufacturing and cleaning processes.
Experience in designing,fabrication, and testing of mechanical, electro-mechanical modules, andrelated system interfaces for capital equipment tools.
Good capability to evaluate andwork outside contractors, consultants, and machine shops.
Excellent English written andverbal communication skills.

Personal skills

Can observe and respond to people and situations and interact with others encountered in the course of work.
Can learn and apply new information or skills.
Must be able to read and interpret data, information, and documents.
Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
Ability to complete assignments with attention to detail and high degree of accuracy.
Proven ability to perform effectively in a demanding environment with changing workloads.
Result driven-demonstrate ownership and accountability.
Identifies bottlenecks and drives improvements.
Work independently or as part of a team and follow through on assignments with minimal supervision.
Demonstrate open, clear, concise and professional communication.
Ability to establish and maintain cooperative working relationships with co-workers and customer.
Work according to a strict set of procedures within the provided timelines.

Other information

Routinely required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the campus.
Occasionally lift and/or move up to 20 pounds.
May require travel (specify domestic and/or international) dependent on business needs – specify percentage of travel.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
Can observe and respond to people and situations and interact with others encountered in the course of work.
Can learn and apply new information or skills.
Must be able to read and interpret data, information, and documents.
Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
Ability to complete assignments with attention to detail and high degree of accuracy.
Proven ability to perform effectively in a demanding environment with changing workloads and deadlines.
Result driven-demonstrate ownership and accountability.
Identifies bottlenecks and drives improvements.
Work independently or as part of a team and follow through on assignments with minimal supervision.
Demonstrate open, clear, concise and professional communication.
Ability to establish and maintain cooperative working relationships with manager, co-workers and customer.
Work according to a strict set of procedures within the provided timelines.
Able and willing to travel about 5% of work time

EOE AA M/F/Veteran/Disability


Learn more about this job