19 days ago - req29356

Sr. Electro-mechanical Engineer

Research & development

Mechanical engineering

In a nutshell

Location

San Jose - CA, US

Team

Research & development

Experience

3-7 years

Degree

Master

Job Category

Mechanical engineering

Introduction

ASML US brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, the Netherlands, and we have 18 office locations around the United States including main offices in Chandler Arizona, San Jose and San Diego California, Wilton Connecticut, and Hillsboro Oregon.

Job Mission

The Senior Electro-mechanical Engineer position is set to play an important role in layout, routing, part selection, design, implementation, testing and troubleshooting of all electrically-driven devices in our new SEM (Scanning Electron Microscope) systems, including stages, robots, motors, pumps, fans, PLC, etc. While function performances of each equipped device must meet system’s requirements, minimization of electronic noises/interferences, acoustic noises, mechanical vibration and heat dissipation must also be taken into comprehensive consideration to these sensitive systems. Industrial standards/regulations should be conformed and high reliability should be ensured.

This position may require access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require the Company to proceed with candidates who are immediately eligible to access controlled technology.

Job Description

Lead the communication between designers and project manager, close the gap between concept and reality.
Cross-functional management with Supply Chain, Purchasing, Manufacturing and multi-aspects engineering stakeholders.
Deep involvement of System Cable layout, Cable Routing, Schematic Design, Cable Manufacturing and Validation.
Design Electro-mechanical enclosures, together with life cycle implementation, concept and detailed 3D CAD design of complex electrical cabinets, modules, racks and PCBA according to semiconductor industry requirement, and prepare for 2D drawings for manufacturing.
Teamcenter data management and documentation maintenance, NX 3D/2D modeling and drafting, Synchronous Modeling, Surface Modeling and Curve design.
Generate technical performance specifications, lead TAS review with supplier, extensive review of 2D drawing, 3D design and manufacturing documentations, and provide detailed feedback to design owners and manufacture. Creation of detailed design documentation and review documents including performance specification, design specification, critical design review document, test specification, test report and more.
Involve system integration and calibration, provide in-depth understanding of system issues and solutions. Requires prototype testing in semiconductor machine environment and bench environment, and shall be able to quickly locate root cause if any issue comes up.

Education

BS degree in Mechanical Engineering, MS degree preferred. (Knowledge in electromechanical engineering with wide scope to most related fields.)

Experience

Minimum three (3) years ofrelevant, work related experience in electro-mechanical design, onelectrical modules, racks, cabinets and PCBAs.
Skilled usage of Solidworks / NX(preferred) is needed for 3D and 2D design, previous experience with PLMsoftware is needed (Teamcenter is preferred).
Knowledge of heat transfer andfluid dynamics, and can use ANSYS and STAR-CCM+to perform simulations.
Knowledge of basic manufacturingprocesses and surface finish processes including machining, sheet metal,casting and more.
Previous working experience inelectron-beam scanning microscope systems is a plus, electronic modulesand semiconductor industrial with a good understanding of general industrystandard and safety standard is preferred.
Cable routing and cable designexperience is a plus.
Understand basic Electrical Engineeringknowledge, can read electrical schematic, wiring diagram and generalelectrical datasheet, and can use the knowledge to choose correctcomponents in design to meet certain industry standard/requirements,including the safety standard, eg, NFPA79.
Experience with technical writingin requirements, design specifications and test plans.
Can multi-task to achievesuccess.
Can make technical decisionsbased on a good understanding of design scope, timeline and cost.

Personal skills

Independent working ability; strong initiative, self-motivation and team-working attitude
Strong oral and written communication skills.
Can observe and respond to people and situations and interact with others encountered in the course of work.
Can learn and apply new information or skills.
Must be able to read and interpret data, information, and documents.
Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
Ability to complete assignments with attention to detail and high degree of accuracy.
Proven ability to perform effectively in a demanding environment with changing workloads.
Result driven-demonstrate ownership and accountability.
Identifies bottlenecks and drives improvements.
Work independently or as part of a team and follow through on assignments with minimal supervision.
Demonstrate open, clear, concise and professional communication.
Ability to establish and maintain cooperative working relationships with co-workers and customer.
Work according to a strict set of procedures within the provided timelines.

Other information

Routinely required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the campus.
Occasionally lift and/or move up to 20 pounds.
May require travel (specify domestic and/or international) dependent on business needs – specify percentage of travel.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
Can observe and respond to people and situations and interact with others encountered in the course of work.
Can learn and apply new information or skills.
Must be able to read and interpret data, information, and documents.
Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.
Ability to complete assignments with attention to detail and high degree of accuracy.
Proven ability to perform effectively in a demanding environment with changing workloads and deadlines.
Result driven-demonstrate ownership and accountability.
Identifies bottlenecks and drives improvements.
Work independently or as part of a team and follow through on assignments with minimal supervision.
Demonstrate open, clear, concise and professional communication.
Ability to establish and maintain cooperative working relationships with manager, co-workers and customer.
Work according to a strict set of procedures within the provided timelines.

EOE AA M/F/Veteran/Disability

#LI-AS1


Learn more about this job