30+ days ago - J-00235614-170

Head of Planning and Logistics

Manufacturing

Logistics & supply chain management

In a nutshell

Location

San Diego - CA, US

Team

Manufacturing

Experience

8+ years

Degree

Bachelor

Job Category

Logistics & supply chain management

Introduction to the job

ASML is one of the world’s leading manufacturers of lithography systems that help enable Moore’s Law and the creation of increasingly powerful and capable electronic devices. Our San Diego-based light source division, Cymer, is renowned for developing both deep ultraviolet (DUV) lithography light sources and next generation extreme ultraviolet (EUV) light sources.As the world’s leading semiconductor equipment manufacturer, ASML enables chipmakers to produce cheaper, speedier chips – and to produce them faster – thereby enabling all the technology you use today. The systems we produce integrate several large and sophisticated machines, themselves each a feat of engineering innovation, precision, and speed.

We are a multinational company with over 70 locations in 16 countries, headquartered in Veldhoven, the Netherlands. We have 18 office locations around the United States including main offices in Wilton, CT, Chandler, AZ, San Jose, CA and San Diego, CA (EUV laser source creation).We are currently recruiting for internships located at our office in San Diego, CA.

In the Cymer Light Source (CLS) division in San Diego, we design and manufacture Deep Ultraviolet (DUV) lasers, used directly in the chipmaking process. Far from a basic “consumer” laser, these machines are complex, powerful, and flexible. The lasers we make require: durable and high-speed precise motion-controlled optics to maintain wavelength to femtometer accuracy under high laser powers; advanced materials to endure the harsh Fluorine-rich environments and high powers; clever mechanical designs to allow high performance and fit all the parts within a confined space, but still allow easy manufacturing and servicing; very fast high power electronics and electrical designs to deliver short high voltage pulses at precise timing to control pulse energy within hundredths of a percent; gas flows at hurricane speeds to keep the laser discharge area clear; cutting edge controllers and algorithms to deliver stable and consistent performance and automate all operations; and advanced real-time electronics, firmware and software to control the laser and interact with other equipment. The laser needs to minimize use of expensive or rare resources like energy or Neon gas. It needs to actively control temperatures, pressures, gas concentrations and voltages precisely to maintain good performance. It must react instantly to changing customer demands and environmental conditions. And it needs to do all of this, operating continuously and reliably for months while producing billions of perfect light pulses, without any human intervention or downtime.

If you have a passion for technology and innovation you’ll want to check us out. Be a part of Cymer / ASML. Be a part of progress.

One Company, One Goal, Limitless Innovation. It's our people that make the difference.

Role and responsibilities

The mission of the Head of Planning & Logistics is to lead the Cymer material planning, production planning and logistics team to plan and secure on-time and first-time-right material availability for the Cymer factory and internal customers. This person is responsible for E2E material planning and optimization of internal processes to execute material planning, master planning, and warehousing with overall responsibility for inventory control processes and efficient inventory management

  • Supports material planning, factory planning, and execution of the efficient movement of material from the warehouse to production, including raw and WIP inventory management.
  • Responsible for MRP and production schedule to ensure customer demand and service level targets are met.
  • Manages inventory to meet inefficient inventory goals and responsible for inventory scorecard.
  • Responsible for reverse logistics process, inbound and outbound logistics, storage and 3rd Party logistics management.
  • Manages inventory to meet inefficient inventory goals and responsible for inventory scorecard.
  • Interfaces with procurement and Strategic Sourcing team to manage logistics supplier, material availability, and cost targets.
  • Develops, modifies, and implements company policies that impact an organization and may affect a Business Unit.
  • Develops material and factory planning procedures and objectives. Maintains departments KPI’s and communication to stakeholders.

Education and experience

Bachelor’s degree Business, Operations Management, Logistics or Supply Chain Management.

Minimum of five (10) years relevant, work-related experience in Supply Chain Management or Manufacturing in high volume, complex technical field

Skills

Working at the cutting edge of tech, you’ll always have new challenges and new problems to solve – and working together is the only way to do that. You won’t work in a silo. Instead, you’ll be part of a creative, dynamic work environment where you’ll collaborate with supportive colleagues. There is always space for creative and unique points of view. You’ll have the flexibility and trust to choose how best to tackle tasks and solve problems.
To thrive in this job, you’ll need the following skills:

  • Advanced knowledge of planning, supply chain and Lean.
  • Advanced knowledge of ERP systems and WMS.
  • Experience managing a 3PL.
  • Project Management experience desired.
  • Personal skills
  • Excellent written and verbal communication skills.
  • Ability to translate, to statistically analyze data, and to effectively report problems through written and/or graphical formats.
  • Excellent customer service skills, with an advanced understanding of customer relationship building.
  • Ability to use MS Word, Excel, PowerPoint, and electronic e-mail systems.
  • Ability to build strong/ collaborative relationship building with internal customers, peers and support functions.
  • Strong people leadership skills including hiring, coaching and developing staff in a culture of empowerment and accountability through metric driven objectives.

Diversity & Inclusion

ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company.

Other information

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • While performing the duties of this job, the employee routinely is required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch.
  • The employee is occasionally required to move around the campus.
  • The employee may occasionally lift and/or move up to 50 pounds.
  • May require travel dependent on business needs.
  • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
  • Can work under deadlines.
  • The environment generally is moderate in temperature and noise level.
  • Must be able to read and interpret data, information, and documents.
  • Can observe and respond to people and situations and interact with others encountered in the course of work.
  • Can learn and apply new information or skills.
  • Responsibilities include periodic travel to regional and overseas sites for product technical support and special support projects.
  • Work may include onsite technical support involving heavy lifting of equipment & modules.
  • Position will require technical work activity in a clean-room production environment and/or laboratory setting.
  • The environment generally is moderate in temperature and noise level.
  • Occasionally may be exposed to loud noise bursts and may be exposed to toxic gases (fluorine).
  • Must be able to work in small, confined spaces.

This U.S. position is open to U.S. workers only. A U.S. Worker is someone who is either a U.S. Citizen, U.S. National, U.S. Lawful Permanent Resident, or a person granted Refugee or Asylum status by the U.S. Government. The Company will not sponsor a foreign national for this position

EOE AA M/F/Veteran/Disability

Need to know more about applying for a job at ASML? Read our frequently asked questions.


Learn more about this job

About the job category
About the team
About the location