You can withdraw your consent at any time on our cookie consent page.Configure your cookie settings and confirm to save your settings. You can withdraw or change your consent at any time on our cookie consent page.
30+ days ago - J-00240116-529
EUV Sr Scientist
In a nutshell
San Diego - CA, US
Introduction to the job
ASML US, LP brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, the Netherlands, and we have 18 office locations around the United States including main offices in Wilton, CT, Chandler, AZ, San Jose, CA and San Diego, CA.
“This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASM0L to proceed with applicants who are immediately eligible to access controlled technology.”
We are presenting you with a unique and exciting opportunity to join a dynamic and innovative Technology Development team, focused on conceiving and demonstrating the technologies required for next generations of high-power extreme ultraviolet (EUV) light sources. Based on a laser produced plasma (LPP), our light source relies on a wide range of unique and challenging technologies, ranging from laser light amplification and high-power optical systems to laser produced plasma for EUV generation, electro-optical signal detection and algorithm-based actuation for process control. You are invited to bring your passion, knowledge and expertise in areas of applied physics, plasmas, metrology, optics, controls, lasers, and experiment design to push the boundaries of these technologies forward.
A key ingredient in the EUV generation process is a stable source of molten tin droplets. These droplets provide the fuel for the laser-produced plasma and serve as the heart-beat for synchronizing the EUV source. The challenge is to reliably produce nearly perfect droplets of molten tin at a rate of tens of thousands of times per second with speeds of 10’s of m/s and position stability within a fraction of a droplet diameter. If these dimensions were scaled up to the game of golf, this would be equivalent to continuously scoring hole-in-ones in a hole that’s 25 km away in swirling gas flows and a plasma that’s hotter than the surface of the sun. The successful candidate will be comfortable operating in this diverse mix of physics, engineering and materials science, in order to define the droplet generator architecture for next generations of the EUV source. The successful candidate will also have a passion for innovation, be driven by curiosity, and have deep technical understanding, in order to excel in a Research environment operating at the fuzzy front end of product development. A key ingredient for success in this space is the ability to transform a complicated multiphysics environment into a sequence of more easily digestible phenomena. A strong analytical mindset is needed to corral these phenomena into models which capture the relevant physics, resulting in predictable droplet behavior based on hardware.
Role and responsibilities
- Guide development of high-level architecture of the model(s) used for the generation of droplets in the EUV source
- Build, improve and maintain droplet generator models anchored via experimental validation; build and maintain model improvement roadmaps; prioritize model improvement activities
- Provide input to technology roadmaps and identify key scientific learning objectives and define corresponding experimental design to arrive at design guidelines, performance requirements and procedures to product teams
- Identification of key scientific learning objectives and corresponding experimental design which will further the technological progress of the EUV generation process
- Demonstration of system-wide performance targets to meet the future technology roadmap
- Develop and execute system and subsystem performance tests, analyze test results and extract actionable knowledge from sub-module to full-system levels
- Troubleshoot issues with laser, tin delivery, and optical systems in order to improve the EUV generation process
- Document learning and communicate knowledge to engineering and product development teams to guide product improvement and release of new product nodes
- Work independently and in teams to deliver on a stated objective, whether it be the pursuit of new knowledge, the demonstration of a new capability, or the characterization of existing performance
Education and experience
Working at the cutting edge of tech, you’ll always have new challenges and new problems to solve – and working together is the only way to do that. You won’t work in a silo. Instead, you’ll be part of a creative, dynamic work environment where you’ll collaborate with supportive colleagues. There is always space for creative and unique points of view. You’ll have the flexibility and trust to choose how best to tackle tasks and solve problems.
To thrive in this job, you’ll need the following skills:
- Experience with microfluidics, liquid jet breakup and droplet coalescence in particular; piezoelectricity; and acoustics is highly desired; familiarity with modeling one or more of these processes is also desired
- Experience architecting high-level model structure into digestible components with crisp interfaces is desired; experience coordinating multiple components of a model is desired; experience implementing physics concepts into models is also a plus
- Sufficient affinity with numerical methodology and modeling to be able to make the right trade-offs between model accuracy and computational complexity
- Deep understanding of scientific research methods and strong scientific curiosity, with demonstrated knowledge in metrology development and data analysis
- Hands-on experience with complex, preferably high pressure, system design and build, including rapid prototyping, characterization and troubleshooting via breadth of metrology techniques, and system-level demonstrations
- Experience with high pressure applications such as water jet cutting, jet breakup, and nozzle design is a plus.
- Experience with acoustics designs is also a plus: resonant cavities in the kHz/MHz regime; transfer function design for enhancing/suppressing energy transfer into liquids; piezo-driven system design.
- Experience with droplet formation, sprays, common-rail diesel, and/or injectors is a plus.
- Extensive experience with experimental data analysis and development of data analysis tools with, for instance, Matlab or Python and data acquisition systems such as NI Labview
- The successful candidate will not only have excelled in their technical field, but will have demonstrated inter-personal and communications strengths
- Ability to clearly and logically communicate ideas and knowledge to various audiences
- Demonstrated ability to manage and lead a research project involving multiple stakeholders and constraints
- Demonstrated ability to work effectively as a part of a team and lead investigation and research efforts
Diversity & Inclusion
ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company.
PHYSICAL DEMANDS AND WORK ENVIRONMENT
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee routinely is required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch.
- The employee is occasionally required to move around the campus.
- The employee may occasionally lift and/or move up to 20 pounds.
- May require travel dependent on business needs.
- Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
- Can work under deadlines.
EOE AA M/F/Veteran/Disability
Need to know more about applying for a job at ASML? Read our frequently asked questions.