Manufacturing Computer Support Technician 2nd Shift

Manufacturing

Other job categories

In a nutshell

Location

San Diego - CA, US

Team

Manufacturing

Experience

3-7 years

Degree

Associate

Job Category

Other job categories

Travel

No

Published: 30+ days ago Job ID: J-00255173-029

Introduction to the job

ASML is one of the world’s leading manufacturers of lithography systems that help enable Moore’s Law and the creation of increasingly powerful and capable electronic devices. Our San Diego-based light source division, Cymer, is renowned for developing both deep ultraviolet (DUV) lithography light sources and next generation extreme ultraviolet (EUV) light sources.As the world’s leading semiconductor equipment manufacturer, ASML enables chipmakers to produce cheaper, speedier chips – and to produce them faster – thereby enabling all the technology you use today. The systems we produce integrate several large and sophisticated machines, themselves each a feat of engineering innovation, precision, and speed.

We are a multinational company with over 70 locations in 16 countries, headquartered in Veldhoven, the Netherlands. We have 18 office locations around the United States including main offices in Wilton, CT, Chandler, AZ, San Jose, CA and San Diego, CA. We are currently recruiting for internships located at our office in San Diego, CA.

In the Cymer Light Source (CLS) division in San Diego, we design and manufacture Deep Ultraviolet (DUV) lasers, used directly in the chipmaking process. Far from a basic “consumer” laser, these machines are complex, powerful, and flexible. The lasers we make require: durable and high-speed precise motion-controlled optics to maintain wavelength to femtometer accuracy under high laser powers; advanced materials to endure the harsh Fluorine-rich environments and high powers; clever mechanical designs to allow high performance and fit all the parts within a confined space, but still allow easy manufacturing and servicing; very fast high power electronics and electrical designs to deliver short high voltage pulses at precise timing to control pulse energy within hundredths of a percent; gas flows at hurricane speeds to keep the laser discharge area clear; cutting edge controllers and algorithms to deliver stable and consistent performance and automate all operations; and advanced real-time electronics, firmware and software to control the laser and interact with other equipment. The laser needs to minimize use of expensive or rare resources like energy or Neon gas. It needs to actively control temperatures, pressures, gas concentrations and voltages precisely to maintain good performance. It must react instantly to changing customer demands and environmental conditions. And it needs to do all of this, operating continuously and reliably for months while producing billions of perfect light pulses, without any human intervention or downtime.

If you have a passion for technology and innovation you’ll want to check us out. Be a part of Cymer / ASML. Be a part of progress.

Role and responsibilities

We have an exciting opportunity for a Manufacturing Equipment Maintenance Computer Test Support Technician to join our manufacturing operations here at our San Diego location. This is a 2nd shift position with hours of 2pm to 10:30pm, Monday - Friday. This role is also automatically eligible for a $2,000 sign-on bonus for the selected candidate.

This position enables the success and uninterrupted output of manufacturing operations. High focus on uptime of manufacturing test equipment and tooling. Performs computer electrical and mechanical troubleshooting, repair and testing of in-house lasers, test fixtures, and associated test equipment to maintain equipment in optimum condition. Dismantles, adjusts, repairs and assembles equipment according to layout plans, blueprints, operating or repair manuals, rough sketches or drawings. Uses test and diagnostic equipment to perform checkouts. Rebuilds manufacturing equipment as required. May perform equipment modifications as directed by manufacturing engineers.

Duties and Responsibilities

  • Ability to use standardized tools and electronic measuring equipment (i.e., torque wrenches, electric and pneumatic screwdrivers and ball drivers, lifting equipment) to install/remove or perform testing and troubleshooting.
  • May train others on test processes and troubleshooting.
  • Performs a variety of moderate technical service/support duties, complex in nature, requiring specialized knowledge (i.e., sub-assembly, assembly, build, test, R&D, QA).
  • May utilize functional area databases to run reports and analyze/ trend data and make recommendations to management in order to meet production needs.
  • Determines or recommends methods and procedures on new assignments, and may provide guidance to other Manufacturing, Assembly, or Manufacturing Engineering personnel.
  • Works with management to enforce safety and security procedures.
  • Qualified to effectively perform maintenance on high purity vacuum and gas, oil delivery, and pneumatic systems.
  • Proficient in determining the nature of a production problem; evaluate resources; coordinate with available personnel to achieve a desirable outcome, while assigned as the on-call mechanic.
  • Familiarity with PLC logic and automated control systems.
  • Capable of accurately and efficiently entering all data related to assigned tasks into a Computerized Maintenance Management Software.
  • Ensure a timely response, repair and solution to equipment related issues, and take action to solve problems, when they are encountered, by teaming with other organizations/ individuals to ensure customer satisfaction.
  • Comply and enforce company’s/ OSHA’s Lock-out Tag-out procedures and all pertinent safety instructions, fully understanding Safety Data Sheets and OSHA’s Hazard Communication System.
  • Performs other duties as assigned.


Education and experience

  • Requires a High School Diploma or equivalent.
  • Associate’s Degree in technical or scientific field is highly desired.
  • A minimum of four (4) years of related work experience preferred.
  • Experience in using electronic, pneumatic, and hand tools preferred.

Skills

Working at the cutting edge of tech, you’ll always have new challenges and new problems to solve – and working together is the only way to do that. You won’t work in a silo. Instead, you’ll be part of a creative, dynamic work environment where you’ll collaborate with supportive colleagues. There is always space for creative and unique points of view. You’ll have the flexibility and trust to choose how best to tackle tasks and solve problems.
To thrive in this job, you’ll need the following skills:

  • Advanced knowledge of computer software, hardware and experience building PCs.
  • Advanced knowledge of Windows 2000/XP/7 and 10.
  • Familiar with networking protocols, hardware configurations and nomenclature.
  • Ability to build and repair custom cable assemblies.
  • Electronics repair to board level a plus.
  • Ability to read and interpret data, information, documents and engineering drawings.
  • Able to use electric/pneumatic tools.
  • Must be able to follow written assembly procedures and bill of materials (BOM).
  • Experience with electro-optical and/or opto-mechanical systems as well as environmental testing is desired.
  • Experience with Automated Testing Equipment, LabVIEW preferred.
  • Highly skilled user of tools and equipment (e.g., oscilloscopes, voltage and current probes, multi-meters, leak detectors, chart recorders and electro/ mechanical tools); may be viewed as the “go to” person for answering technical questions.
  • Ability to perform in-process quality inspections of components and/or full assemblies within the Manufacturing area(s).
  • Knowledge of Lean Manufacturing and 5S principles preferred.
  • Excellent written and verbal communication skills. Act as point of contact to IT department for network issues.
  • Ability to work with minimal supervision.
  • Ability to work in a multi-shift environment.
  • Capability to work in a team environment.
  • Flexibility to work off shift hours to support company requirements and fill-in, as required, in other departments.
  • Can learn and apply new information or skills.
  • Can work under deadlines.

Diversity & Inclusion

ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company.

Other information

Thisposition is located on-site in San Diego, CA . It requires onsite presence to attend in-person worrk-related events, trainings and meetings and to further ensure teamwork, collaboration and innovation.

  • While performing the duties of this job, the employee routinely is required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch.
  • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
  • The environment generally is moderate in temperature with moderate to high noise level in a cleanroom environment.
  • Must be willing to work in a cleanroom or manufacturing environment, wearing assigned Personal Protective Equipment (PPE): coveralls, masks, hoods, booties, safety glasses and/or gloves for entire duration of shift.
  • Must be willing to occasionally lift, pull and/or push up to 35 pounds.

#LI-MO1

EO

EOE AA M/F/Veteran/Disability

Need to know more about applying for a job at ASML? Read our frequently asked questions.


Learn more about this job

About the job category
About the team
About the location