Sr. Electrical Engineer

Introduction to the job

ASML US, including its affiliates and subsidiaries, bring together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, Netherlands, and we have 18 office locations around the United States including main offices in Chandler, Arizona, San Jose and San Diego, California, Wilton, Connecticut, and Hillsboro, Oregon.

Role and responsibilities

Design mixed signal circuit which includes but not limited to, analog switch, data converter (DAC and / or ADC) for e-beam deflection systems.
Design low-noise, high bandwidth and high linearity amplifier circuit for e-Beam drivers
Lead the design team on quick turn around prototyping, all the way from preliminary feasibility study, schematic, PCB layout to prototype validation
Working with Sr. Designers and Function Architects to derive function/performance specification of subsystem or modules from high level requirements.
Conduct schematic capture, circuit simulation, PCB layout for all types of circuits mentioned above
Work with sourcing team and procurement team to select the right outside suppliers for components and fabrication service
Support sub-system level and system level integration and troubleshooting

Education and experience

Master with +8 years of hands-on experience or Ph. D. with 3+ years experience
Hands-on experience on LNA/ADC/DAC circuit design, performance quantification and optimization, including corresponding front-end circuits.
Mixed signal circuit design with high sampling rate (>800Msps, 16bits and beyond). Utra-low noise wideband analog switch / switch matrix circuit (operation frequency range starting from DC to at least several hundred MHz)
Familiar with equipment such as DMM, SMU, signal / function generator, oscilloscope, signal / spectral analyzer, and network analyzer.
Having dense experience working with suppliers on DFM/DFT improvement for high-volume manufacturing.
Knowledge and experiences of board level and module level shielding and grounding
Familiar with simulation tooling for circuit performance modeling
Experienced with high-voltage(>400VDC) signal amplifier circuit design, including safety compliance consideration.
Familiar with electrical element selection based on characteristics, performance, application and cost.
Additional Skills and Experience Preferred:
Knowledge and experiences of signal integrity and power integrity is a plus
Knowledge and experiences of PCBA / module level thermal management is a plus
Knowledge and experiences of test/measurement automation is a plus
Knowledge and experiences of EMI/EMC compliance is a plus

This position may require access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require the Company to proceed with candidates who are immediately eligible to access controlled technology.

The California base annual salary / hourly range for this role is currently $134.625- $224,375. Pay scales are determined by role, level, location and alignment with market data. Individual pay is determined through interviews and an assessment of several factors that that are unique to each candidate, including but not limited to, job-related skills, relevant education and experience, certifications, abilities of the candidate and
pay relative to other team members. Our recruiters can share more information about our bonus program, benefits and equity during the hiring process.

Skills

Working at the cutting edge of tech, you’ll always have new challenges and new problems to solve – and working together is the only way to do that. You won’t work in a silo. Instead, you’ll be part of a creative, dynamic work environment where you’ll collaborate with supportive colleagues. There is always space for creative and unique points of view. You’ll have the flexibility and trust to choose how best to tackle tasks and solve problems.
To thrive in this job, you’ll need the following skills:

PCB/PCBA design tooling: OrCAD/Allegro or Xpedition
Circuit Simulation: LTSpice, TINA, Matlab Simnulink
Being able to interpret and qualify circuit through general indicators such as SNR/SFDR, ENOB, PSRR, Phase noise …etc
Being able to interpret data, sorting out plan from test result to conclusion and actions.
Demonstrate open, clear, concise and professional communication.
Work with cross-discipline team to achieve higher level functions

Diversity & Inclusion

ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company.

Other information

EOE AA M/F/Veteran/Disability

Need to know more about applying for a job at ASML? Read our frequently asked questions.

#LI-AS1
#LI-Hybrid